POP N WORK (FOF) FX-20824-HDD TWO CONNECTING TENTS COVERING A 20 foot X 8 foot SPACE
Available*
Item # 37577840
Model # FX-20822HHD
$3,363.00
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Tent
Tools
Tents- Umbrellas-- Canvases
Ground
Creative Tent Solutions
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
POP N WORK (FOF) FX-20822-HDD TWO CONNECTING TENTS COVERING A 20' X 8' SPACE. EACH is 84" AT EAVE - 106" AT PEAK
ITEM #: 37577840
MODEL #: FX-20822-HDD
The FX-20822-HDD are two (10' x 8') adjoining FX tents covering a 20' x 8' space. Has a full-width zipper roll-up door and a 3' wide roll-up door. The larger size connecting tents have a special connecting flap. Either FX tent can be used as a stand alone tent also, it has the advantage of a pitched roof and a unified frame. The frame has non-breakable hinges and is designed for quick cover replacement.
The Flex Tent has no ground struts. Instead, it has a telescoping X-frame in the back wall which extends or retracts automatically as you pop the sidewall frames in or out. The X-frames provides four additional features:
*FITS INTO TIGHT SPOTS - The telescoping X-Frame allows your tent to fit into smaller spaces. *IDEAL FOR SPLICING - The flexible frame easily adapts to rough terrain and makes it possible to set the tent over cables and other obstructions. *LARGE TENT STABILITY - The backwall X-frame gives the Flex Tent free-standing stability, and it also provides vertical structural strength making even large tents very stable and rugged. *DOORS - Small Flex Tents can have only one door. But the 10' x 8' and 12' x 10' can have two doors.
The pitched roof allows for extra headroom and structural strength for hanging lights and tools. Also standard on these tents is a 9" x 36" vent window and a 10" blower port with a draw cord closure in each.
FRAME - EXCEPTIONAL WIND STABLITY *Integrated fiberglass rod tension frame *70% glass content *Cold rolled steel hinges, *18-guage galvanized tubing roof struts. *Rods are bolted at both ends.
UNIFIED FRAME DESIGN - *Quick/easy cover removal or replacement *Reduces tent costs.
COVER - *Flame Retardant - CPAI-84 *ANSI safety green sidewalls *Urethane coated polyester *Water Repellant coating *UV treated *Doors, Back and Roof = 250 Denier Polyester *Sidewalls = 300 Denier Polyester
ADDITIONAL FEATURES - *14' Windlines on each side of the tent *12" Ground Flaps on the sides
QUICK-PAK - *Large ground flap along the rear wall that is used to both carry and store the tent. *Just roll the tent into the flap, then snap the hooks. *Carry handle is attached.
DIMENSIONS: TWO 10' x 8' CONNECTING TENTS covering a 20' x 8' section when put together.
HEIGHT: 84" at eaves, 106" at peaks.
SHIPPING DIMENSIONS: 18" x 98"
SHIPPING WEIGHT: 125 LBS
ITEM #: 37577840
MODEL #: FX-20822-HDD
The FX-20822-HDD are two (10' x 8') adjoining FX tents covering a 20' x 8' space. Has a full-width zipper roll-up door and a 3' wide roll-up door. The larger size connecting tents have a special connecting flap. Either FX tent can be used as a stand alone tent also, it has the advantage of a pitched roof and a unified frame. The frame has non-breakable hinges and is designed for quick cover replacement.
The Flex Tent has no ground struts. Instead, it has a telescoping X-frame in the back wall which extends or retracts automatically as you pop the sidewall frames in or out. The X-frames provides four additional features:
*FITS INTO TIGHT SPOTS - The telescoping X-Frame allows your tent to fit into smaller spaces. *IDEAL FOR SPLICING - The flexible frame easily adapts to rough terrain and makes it possible to set the tent over cables and other obstructions. *LARGE TENT STABILITY - The backwall X-frame gives the Flex Tent free-standing stability, and it also provides vertical structural strength making even large tents very stable and rugged. *DOORS - Small Flex Tents can have only one door. But the 10' x 8' and 12' x 10' can have two doors.
The pitched roof allows for extra headroom and structural strength for hanging lights and tools. Also standard on these tents is a 9" x 36" vent window and a 10" blower port with a draw cord closure in each.
FRAME - EXCEPTIONAL WIND STABLITY *Integrated fiberglass rod tension frame *70% glass content *Cold rolled steel hinges, *18-guage galvanized tubing roof struts. *Rods are bolted at both ends.
UNIFIED FRAME DESIGN - *Quick/easy cover removal or replacement *Reduces tent costs.
COVER - *Flame Retardant - CPAI-84 *ANSI safety green sidewalls *Urethane coated polyester *Water Repellant coating *UV treated *Doors, Back and Roof = 250 Denier Polyester *Sidewalls = 300 Denier Polyester
ADDITIONAL FEATURES - *14' Windlines on each side of the tent *12" Ground Flaps on the sides
QUICK-PAK - *Large ground flap along the rear wall that is used to both carry and store the tent. *Just roll the tent into the flap, then snap the hooks. *Carry handle is attached.
DIMENSIONS: TWO 10' x 8' CONNECTING TENTS covering a 20' x 8' section when put together.
HEIGHT: 84" at eaves, 106" at peaks.
SHIPPING DIMENSIONS: 18" x 98"
SHIPPING WEIGHT: 125 LBS
