POP N WORK (FOF) FX-201222-HDD TWO 12 foot x 10 foot CONNECTING TENTS COVERING A 12 foot X 20 foo
Available*
Item # 37577860
Model # FX-201222HDD
$3,665.00
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Tent
Tools
Tents- Umbrellas-- Canvases
Ground
Creative Tent Solutions
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
POP N WORK (FOF) FX-201222-HDD TWO CONNECTING FX TENTS COVERING A 20' X 12' SPACE
ITEM #: 37577860
MODEL # FX 201222 HDD
The FX-201222-HDD are two connecting FX tents (10' x 12') covering a 20' x 12' space. Each tent is 84" high at eaves and 106" high at each peak. Each tent has a 3' wide roll-up door and a full width roll-up, two zipper door. The roll up door also can be used as a canopy. This provides added weather protection and makes it easy to slide the tent over cabinets.
Canopies (two or even more) can be connected to cover large cabinets or other job sites. A drainage channel connecting the canopy covers keeps workers and worksite dry. The other attached wall sections can be attached in any position that makes the zipper door locations convenient.
The Flex Tent has no ground struts. Instead, it has a telescoping X-frame in the back wall which extends or retracts automatically as you pop the sidewall frames in or out. The X-frames provides four additional features:
*FITS INTO TIGHT SPOTS - The telescoping X-Frame allows your tent to fit into smaller spaces. *IDEAL FOR SPLICING - The flexible frame easily adapts to rough terrain and makes it possible to set the tent over cables and other obstructions. *LARGE TENT STABILITY - The backwall X-frame gives the Flex Tent free-standing stability, and it also provides vertical structural strength making even large tents very stable and rugged. *DOORS - Small Flex Tents can have only one door. But the 10' x 8' and 12' x 10' can have two doors.
The pitched roof feature allows for extra headroom and structural strength for hanging lights and tools. Also included is a 9" x 16" vent window and 9" blower port in the back.
FRAME - EXCEPTIONAL WIND STABLITY *Integrated fiberglass rod tension frame *70% glass content *Cold rolled steel hinges, *18-guage galvanized tubing roof struts. *Rods are bolted at both ends.
UNIFIED FRAME DESIGN - *Quick/easy cover removal or replacement *Reduces tent costs.
COVER - *Flame Retardant - CPAI-84 *ANSI safety green sidewalls *Urethane coated polyester *Water Repellant coating *UV treated *Doors, Back and Roof = 250 Denier Polyester *Sidewalls = 300 Denier Polyester
ADDITIONAL FEATURES - *14' Windlines on each side of the tent *12" Ground Flaps on the sides
QUICK-PAK - *Large ground flap along the rear wall that is used to both carry and store the tent. *Just roll the tent into the flap, then snap the hooks. *Carry handle is attached.
DIMENSIONS: TWO 10' x 12' CONNECTING TENTS covering an 20' x 12' section when put together.
HEIGHT: 84" at eaves, 106" at peaks.
SHIPPING DIMENSIONS: 18" x 108"
SHIPPING WEIGHT: 156 LBS
ITEM #: 37577860
MODEL # FX 201222 HDD
The FX-201222-HDD are two connecting FX tents (10' x 12') covering a 20' x 12' space. Each tent is 84" high at eaves and 106" high at each peak. Each tent has a 3' wide roll-up door and a full width roll-up, two zipper door. The roll up door also can be used as a canopy. This provides added weather protection and makes it easy to slide the tent over cabinets.
Canopies (two or even more) can be connected to cover large cabinets or other job sites. A drainage channel connecting the canopy covers keeps workers and worksite dry. The other attached wall sections can be attached in any position that makes the zipper door locations convenient.
The Flex Tent has no ground struts. Instead, it has a telescoping X-frame in the back wall which extends or retracts automatically as you pop the sidewall frames in or out. The X-frames provides four additional features:
*FITS INTO TIGHT SPOTS - The telescoping X-Frame allows your tent to fit into smaller spaces. *IDEAL FOR SPLICING - The flexible frame easily adapts to rough terrain and makes it possible to set the tent over cables and other obstructions. *LARGE TENT STABILITY - The backwall X-frame gives the Flex Tent free-standing stability, and it also provides vertical structural strength making even large tents very stable and rugged. *DOORS - Small Flex Tents can have only one door. But the 10' x 8' and 12' x 10' can have two doors.
The pitched roof feature allows for extra headroom and structural strength for hanging lights and tools. Also included is a 9" x 16" vent window and 9" blower port in the back.
FRAME - EXCEPTIONAL WIND STABLITY *Integrated fiberglass rod tension frame *70% glass content *Cold rolled steel hinges, *18-guage galvanized tubing roof struts. *Rods are bolted at both ends.
UNIFIED FRAME DESIGN - *Quick/easy cover removal or replacement *Reduces tent costs.
COVER - *Flame Retardant - CPAI-84 *ANSI safety green sidewalls *Urethane coated polyester *Water Repellant coating *UV treated *Doors, Back and Roof = 250 Denier Polyester *Sidewalls = 300 Denier Polyester
ADDITIONAL FEATURES - *14' Windlines on each side of the tent *12" Ground Flaps on the sides
QUICK-PAK - *Large ground flap along the rear wall that is used to both carry and store the tent. *Just roll the tent into the flap, then snap the hooks. *Carry handle is attached.
DIMENSIONS: TWO 10' x 12' CONNECTING TENTS covering an 20' x 12' section when put together.
HEIGHT: 84" at eaves, 106" at peaks.
SHIPPING DIMENSIONS: 18" x 108"
SHIPPING WEIGHT: 156 LBS
