GMP 08633 SUPPORT MANHOLE PLATFORM D 73 INCHES MAXIMUM LENGTH
Available*
Item # 32310000
Model # 08633
$235.24
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Platforms
Tools
Manhole- Confined Space
Confined Space Manhole
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 08633 SUPPORT MANHOLE PLATFORM D 73 INCHES MAXIMUM LENGTH NEW
D Manhole Platform Support Use two or more of these handy tools with planking to form a temporary platform in a manhole or cable vault. Provides a maximum open working position of 73 in. (185 cm) and a minimum closed working position of 35% in. (902 mm) II Each unit features three telescoping pipe lengths, connected to two hangers that fit on the cable racks at opposite sides of the manhole. The middle pipe section has a friction ring latch that locks onto the outside of the inner pipe to keep the pipes from accidentally extending during handling. The hangers pivot so that you can use the supports even if the racks aren’t directly across from each other. There is a spring latch on each end for locking the support in place when in use. Two wire stops extending through the pipes prevent over-extension of the telescoping sections. Each is supplied with a thin film of oil on the exposed surfaces to minimize rusting and to reduce friction between the telescoping surfaces
P/N 08633 D Manhole Platform Support Weight: 15 lbs. (6 kgs)
D Manhole Platform Support Use two or more of these handy tools with planking to form a temporary platform in a manhole or cable vault. Provides a maximum open working position of 73 in. (185 cm) and a minimum closed working position of 35% in. (902 mm) II Each unit features three telescoping pipe lengths, connected to two hangers that fit on the cable racks at opposite sides of the manhole. The middle pipe section has a friction ring latch that locks onto the outside of the inner pipe to keep the pipes from accidentally extending during handling. The hangers pivot so that you can use the supports even if the racks aren’t directly across from each other. There is a spring latch on each end for locking the support in place when in use. Two wire stops extending through the pipes prevent over-extension of the telescoping sections. Each is supplied with a thin film of oil on the exposed surfaces to minimize rusting and to reduce friction between the telescoping surfaces
P/N 08633 D Manhole Platform Support Weight: 15 lbs. (6 kgs)
