GMP 88256 RODDER DUCT TONEABLE 1/2 inch X 400 foot
Available*
Item # 31252110
Model # 88256
$1,658.25
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Rodders
Tools
Line Construction- Placing
Rodders- Duct
GMP General Machine Products
Rodder 301 to 600 feet
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP 88256 RODDER DUCT TONEABLE 1/2 inch X 400 foot NEW
GMP 88256 RODDER DUCT TONEABLE 1/2 inch X 400 foot NEW
P/N 88256 Duct Rodder with Detectable Rod 1/2 in. (12mm) X 400 ft. (122m) Weight 109 lbs. (49kg)
The GMP toneable duct rodders are available in 3/8 inch and 1/2 inch diameter. Detectable duct rods are used to find, follow and accurately map the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.
The toneable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads can make a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter’s lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides the most effective method of signal transmission.
Toneable Duct Rodder Features • Large internal copper conductor • Premium rod material • Can be used with a sonde
Used with our Traceable Rod Detection Transmitter and Receiver
GMP 88256 RODDER DUCT TONEABLE 1/2 inch X 400 foot NEW
P/N 88256 Duct Rodder with Detectable Rod 1/2 in. (12mm) X 400 ft. (122m) Weight 109 lbs. (49kg)
The GMP toneable duct rodders are available in 3/8 inch and 1/2 inch diameter. Detectable duct rods are used to find, follow and accurately map the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver. The easily identifiable signal is transmitted along the entire length of the duct rod.
The toneable duct rod has an 18 AWG copper wire, almost twice the size of the competition, in the center of the fiberglass core. The copper wire is also connected to the end fittings so the transmitter leads can make a direct connection to the copper wire. The female end fitting provides the attachment point for the transmitter’s lead connection. The other transmitter lead is connected to a stake driven into the earth. The direct connection of the signal to the copper wire provides the most effective method of signal transmission.
Toneable Duct Rodder Features • Large internal copper conductor • Premium rod material • Can be used with a sonde
Used with our Traceable Rod Detection Transmitter and Receiver
