3M 4000DT MS2 SPLICE MODULE CASE/120
Available*
Item # 58365000
Model # 4000DT
$157.50
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Connectors
Material and Supplies
Connectors-Terminators
MS2 25 Pair Modular
3M
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
3M 4000DT MS2 SPLICE MODULE CASE/120 NEW 4000-DT modules have test ports in the base of the module for use in a 4041 in-head tester.
Super Mate 25-pair Splicing Modules provide the reliability of soldered connections, the efficiency of multi-pair splicing, plus the proven performance of MS 2 splicing system. The MS 2 4000TR Series Super-Mini and 4005TR Series Super Mate Modules are the basic components of MS 2 Modular System Splicing from 3M. The modules are building blocks of a systematized splicing technology that can reduce installation time of outside or inside plant and in addition can reduce reworking demands, and save both time and effort in your construction and maintenance programs. Also, to make your job easier, all MS 2 modules are now transparent. U-shaped contacts enable solder-equivalent connections The MS 2 4000 TR 25-pair Series Super-Mini and MS 2 4005TR Super Mate Modules feature an array of U-shaped, phosphor-bronze contacts and stainless steel cut-off blades. As a module is crimped, each contact strips the insulation from the positioned wire and securely grips the conductor. During this crimping operation, the cut-off blades inside each module trim the excess wire. A single crimp completes a gas-tight connection on all 25-pairs in the module. It’s simple and fast, because there’s no need to strip or trim any of the individual pairs. Pair testing is easy Test entry ports on the front side of all modules provide access for testing individual pairs. All tests can be accomplished without opening the module, stripping insulation, or otherwise interrupting service. The rugged design and construction of the modules can withstand crimping and reopening to facilitate transfers or cable rearrangements at any time. 19 4005-DPM/16 16-Pair Pluggable Module The MS 2 ™ 4005-DPM/16 Pluggable Module is a fire-retardant, 16-pair dry pluggable module designed for installation and switching of cable pairs within the central office (CO) or PBX room. This module enables personnel to rearrange and transfer working circuits without interrupting service. 20 The 4005-DPM/16 module gives technicians the ability to perform cutovers quickly, at low cost, and without service interruption. Plus, each cutover is easily reversed. Modules are simply plugged or unplugged in 16-pair groups.
25 pair dry super mini modules
Super Mate 25-pair Splicing Modules provide the reliability of soldered connections, the efficiency of multi-pair splicing, plus the proven performance of MS 2 splicing system. The MS 2 4000TR Series Super-Mini and 4005TR Series Super Mate Modules are the basic components of MS 2 Modular System Splicing from 3M. The modules are building blocks of a systematized splicing technology that can reduce installation time of outside or inside plant and in addition can reduce reworking demands, and save both time and effort in your construction and maintenance programs. Also, to make your job easier, all MS 2 modules are now transparent. U-shaped contacts enable solder-equivalent connections The MS 2 4000 TR 25-pair Series Super-Mini and MS 2 4005TR Super Mate Modules feature an array of U-shaped, phosphor-bronze contacts and stainless steel cut-off blades. As a module is crimped, each contact strips the insulation from the positioned wire and securely grips the conductor. During this crimping operation, the cut-off blades inside each module trim the excess wire. A single crimp completes a gas-tight connection on all 25-pairs in the module. It’s simple and fast, because there’s no need to strip or trim any of the individual pairs. Pair testing is easy Test entry ports on the front side of all modules provide access for testing individual pairs. All tests can be accomplished without opening the module, stripping insulation, or otherwise interrupting service. The rugged design and construction of the modules can withstand crimping and reopening to facilitate transfers or cable rearrangements at any time. 19 4005-DPM/16 16-Pair Pluggable Module The MS 2 ™ 4005-DPM/16 Pluggable Module is a fire-retardant, 16-pair dry pluggable module designed for installation and switching of cable pairs within the central office (CO) or PBX room. This module enables personnel to rearrange and transfer working circuits without interrupting service. 20 The 4005-DPM/16 module gives technicians the ability to perform cutovers quickly, at low cost, and without service interruption. Plus, each cutover is easily reversed. Modules are simply plugged or unplugged in 16-pair groups.
25 pair dry super mini modules
