EMC EM4015 TRAILER CLAMP
Available*
Item # 55766000
Model # EM4015
$7.59
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Clamp
Material and Supplies
Bonding- Grounding
Clamps
EMC Electric Motion Company
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
ELECTRIC MOTION COMPANY EM4015 TRAILER CLAMP NEW EM 4015 With plain round ground wire hole to accept #6–#10 AWG.
Standard packaging: 10/bg, 100/bx, 23 lb/bx.
A tin-plated bronze casting with teeth; brass hex thru-bolt with hole, brass set screw, and bronze lockwasher. Grounding to metal buildings, bridges. Provides connection for bonding and grounding wires, ribbons, and braid to I-beams. Also used as strand clamp (electrical). Teeth penetrate through oxidation or undercoating for positive ground. Applied with the standard terminal wrench. Tin plate reduces corrosion. Hole allows #6 solid or stranded and #10–#12 AWG solid. Silicon bronze for greater strength and conductivity. Perforated bonding ribbon or braid with eyelets attaches under set screw.
EM 4014 With ground wire hole and short slot, enabling connection of #6 and #10 AWG simultaneously. Standard packaging: 10/bg, 100/bx, 23 lb/bx.
EM 4015 With plain round ground wire hole to accept #6–#10 AWG. Standard packaging: 10/bg, 100/bx, 23 lb/bx.
EM 4015C Larger diameter cross hole accommodates stranded #6 AWG ground wire, .228 diameter.
EM 4018 With ground wire hole and long slot to also connect plain bond ribbon. Standard packaging: 10/bg, 100/bx, 24 lb/bx.
EM 4019 — With ground wire hole, long slot for bonding ribbon, and a short slot for #10 or #12 station ground wire. Standard packaging: 10/bg, 100/bx, 24 lb/bx.
A tin-plated bronze casting with teeth; brass hex thru-bolt with hole, brass set screw, and bronze lockwasher. Grounding to metal buildings, bridges. Provides connection for bonding and grounding wires, ribbons, and braid to I-beams. Also used as strand clamp (electrical). Teeth penetrate through oxidation or undercoating for positive ground. Applied with the standard terminal wrench. Tin plate reduces corrosion. Hole allows #6 solid or stranded and #10–#12 AWG solid. Silicon bronze for greater strength and conductivity. Perforated bonding ribbon or braid with eyelets attaches under set screw.
EM 4014 With ground wire hole and short slot, enabling connection of #6 and #10 AWG simultaneously. Standard packaging: 10/bg, 100/bx, 23 lb/bx.
EM 4015 With plain round ground wire hole to accept #6–#10 AWG. Standard packaging: 10/bg, 100/bx, 23 lb/bx.
EM 4015C Larger diameter cross hole accommodates stranded #6 AWG ground wire, .228 diameter.
EM 4018 With ground wire hole and long slot to also connect plain bond ribbon. Standard packaging: 10/bg, 100/bx, 24 lb/bx.
EM 4019 — With ground wire hole, long slot for bonding ribbon, and a short slot for #10 or #12 station ground wire. Standard packaging: 10/bg, 100/bx, 24 lb/bx.
