PLP 8001006 6.5 X 38 FIBER SAFE-REA
Available*
Item # 51440060
Model # 8001006
$1,742.47
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Closure
Fiber Optic Products
Fiber Optic Infrastructure
Fiber Closure
Preformed Line Products
Fiber Closure Sealed
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Preformed Line Products 8001006 6.5" x 38" (165 x 965) FIBERLIGN Fiber Safe for in-line splice applications. Includes: Two Three-Section End Plates, and RUS listed shield connectors. (RUS LISTED)
The Encapsulated, Re-enterable Closure Assembly The FIBERLIGN® Fiber Safe is designed for protecting underground, buried and aerial fiber optic splices. More versatile and flexible than other fiber optic closures, the FIBERLIGN Fiber Safe incorporates a closure within a closure for double protection. The FIBERLIGN Fiber Safe can accommodate butt splice applications or in-line configurations using various End Plate and Splice Case Design Features: Butt Splice Applications The FIBERLIGN Fiber Safe utilizes a preassembled 6.5" (165 mm) End Plate and a variety of cable entry End Plates for butt entry applications. 28" (711 mm) Splice Case shells are provided for these applications. In-line Splice Applications For in-line configurations, the FIBERLIGN Fiber Safe is designed with two 6.5" (165 mm) Three-Section End Plates and 38" (975 mm) Splice Case shells are provided. Cable Entry End Plates A variety of cable entry End Plates are available which provide simple cable entry for both initial construction and future entry. External bonding capability is provided throughout. Splice Trays The FIBERLIGN Fiber Safe accommodates 6 splice trays holding 12 or 18 splices per tray. An expanded capacity closure is available for butt splice applications which utilizes up to 6 splice trays holding 24 splices per tray (Cat. No.: 8001004). Splice trays are available for both fusion and mechanical splices. Vertical Filing The PREFORMED™ vertical file system allows trays to be individually removed, easily reworked and securely repositioned. The snap-on lid assures additional protection to each tray. Expressing Fibers Provisions are made for expressing uncut fibers through the inner closure. LOCKBAR™ Fastening The LOCKBAR System utilizes front and back bars that fit into the flange on both the Splice Case and the inner closure assembly. With factory-assembled nuts and bolts and special sizing, no special tools are needed for a fast, dependable closure. The dual closure system is designed to assure maximum system integrity, with outstanding accessibility and ease of re-entry. Protective Collar An innovative collar attaches to the End Plate inside the closure which provides an additional watertight seal and acts as a substrate to which resin will bond. combinations. Re-enterable encapsulant fills the void between the inner closure and outer Splice Case assembly to provide an additional barrier against moisture. The FIBERLIGN Fiber Safe is easily re-enterable. Unique LOCKBAR™ Fastening allows rapid re-entry for system additions. The closure is filled and refilled through an exterior port in the Splice Case.
The Encapsulated, Re-enterable Closure Assembly The FIBERLIGN® Fiber Safe is designed for protecting underground, buried and aerial fiber optic splices. More versatile and flexible than other fiber optic closures, the FIBERLIGN Fiber Safe incorporates a closure within a closure for double protection. The FIBERLIGN Fiber Safe can accommodate butt splice applications or in-line configurations using various End Plate and Splice Case Design Features: Butt Splice Applications The FIBERLIGN Fiber Safe utilizes a preassembled 6.5" (165 mm) End Plate and a variety of cable entry End Plates for butt entry applications. 28" (711 mm) Splice Case shells are provided for these applications. In-line Splice Applications For in-line configurations, the FIBERLIGN Fiber Safe is designed with two 6.5" (165 mm) Three-Section End Plates and 38" (975 mm) Splice Case shells are provided. Cable Entry End Plates A variety of cable entry End Plates are available which provide simple cable entry for both initial construction and future entry. External bonding capability is provided throughout. Splice Trays The FIBERLIGN Fiber Safe accommodates 6 splice trays holding 12 or 18 splices per tray. An expanded capacity closure is available for butt splice applications which utilizes up to 6 splice trays holding 24 splices per tray (Cat. No.: 8001004). Splice trays are available for both fusion and mechanical splices. Vertical Filing The PREFORMED™ vertical file system allows trays to be individually removed, easily reworked and securely repositioned. The snap-on lid assures additional protection to each tray. Expressing Fibers Provisions are made for expressing uncut fibers through the inner closure. LOCKBAR™ Fastening The LOCKBAR System utilizes front and back bars that fit into the flange on both the Splice Case and the inner closure assembly. With factory-assembled nuts and bolts and special sizing, no special tools are needed for a fast, dependable closure. The dual closure system is designed to assure maximum system integrity, with outstanding accessibility and ease of re-entry. Protective Collar An innovative collar attaches to the End Plate inside the closure which provides an additional watertight seal and acts as a substrate to which resin will bond. combinations. Re-enterable encapsulant fills the void between the inner closure and outer Splice Case assembly to provide an additional barrier against moisture. The FIBERLIGN Fiber Safe is easily re-enterable. Unique LOCKBAR™ Fastening allows rapid re-entry for system additions. The closure is filled and refilled through an exterior port in the Splice Case.
