JONARD AHC-19 Adjustable Round Hole Cutter w/ Vacuum Port, 9 inch 810053350171
Available*
Item # 38312220
Model # AHC-19
$129.95
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Contact To
Tools
Hand Tools
Specialty Tools
Jonard Industries Corp
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
JONARD AHC-19 Adjustable Round Hole Cutter w/ Vacuum Port, 9" 810053350171
Designed for cutting round holes in ceilings, walls, and floors without making a mess, the AHC-19 is the perfect tool for installing recessed speakers, lighting, or other round objects. This adjustable hole cutter features the following:
Can be hooked up to vacuums, with 2.5" (63.5 mm) diameter hose nozzles, to suck up debris as you go Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16" (27 mm) thick Cutting depth is adjustable via hex locknut and compression spring Cuts hole sizes from 2.2" to 9" (56 mm - 228.6 mm) in diameter Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris Compression spring absorbs vibrations while cutting Can be used with any variable-speed drill Power drill and vacuum not included with hole cutter Product Includes: 1 Cover, 1 Adjustable Hole Cutter, 1 Vacuum Port, 1 Cap, 1 Nut, 1 Set of Replacement Blades, 1 Hex Key, and a Rugged Carry Case
Specifications Cut Type Round Hole
Works On Plywood, Sheetrock, Plasterboard, Acrylic Sheet
Cutting Diameter Range 2.2"- 9" (56 mm-228.6 mm)
Vacuum Port Size 2.5" (63.5 mm)
Maximum Cutting Depth 1.1" (27 mm)
Bit Diameter 0.236” (6.0 mm)
Bit Length 2.17" (55 mm)
Bit Material Steel
Hex Chuck Size/Arbor Size 3/8" (9.53 mm)
Dimensions 13" x 4.50" x 13" (33 cm x 33 cm x 11.4 cm)
Weight 5.43 lb (2.47 kg)
UPC # 810053350171
Designed for cutting round holes in ceilings, walls, and floors without making a mess, the AHC-19 is the perfect tool for installing recessed speakers, lighting, or other round objects. This adjustable hole cutter features the following:
Can be hooked up to vacuums, with 2.5" (63.5 mm) diameter hose nozzles, to suck up debris as you go Cuts plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16" (27 mm) thick Cutting depth is adjustable via hex locknut and compression spring Cuts hole sizes from 2.2" to 9" (56 mm - 228.6 mm) in diameter Polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris Compression spring absorbs vibrations while cutting Can be used with any variable-speed drill Power drill and vacuum not included with hole cutter Product Includes: 1 Cover, 1 Adjustable Hole Cutter, 1 Vacuum Port, 1 Cap, 1 Nut, 1 Set of Replacement Blades, 1 Hex Key, and a Rugged Carry Case
Specifications Cut Type Round Hole
Works On Plywood, Sheetrock, Plasterboard, Acrylic Sheet
Cutting Diameter Range 2.2"- 9" (56 mm-228.6 mm)
Vacuum Port Size 2.5" (63.5 mm)
Maximum Cutting Depth 1.1" (27 mm)
Bit Diameter 0.236” (6.0 mm)
Bit Length 2.17" (55 mm)
Bit Material Steel
Hex Chuck Size/Arbor Size 3/8" (9.53 mm)
Dimensions 13" x 4.50" x 13" (33 cm x 33 cm x 11.4 cm)
Weight 5.43 lb (2.47 kg)
UPC # 810053350171
