UNIWELD TYPE17-5 WELDING & BRAZING TIP UPC 30257
Available*
Item # 37838633
Model # 30257
$36.34
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Torches
Tools
Torches- Heat Shrink
HVAC and Plumbing
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
UNIWELD TYPE17-5 WELDING & BRAZING TIP UPC 30257 NEW
The popular Type17 tips come complete with elbow, mixer and nut. Use with Acetylene, Propane, MAP//Pro™ [Propylene] and Natural Gas.
Proudly Made in the USA and 100% Flame Tested Acetylene Consumption SCFH: 15-35 Fuel Pressure PSIG: 8 Oxygen Pressure PSIG: 12 Welding Metal Thickness 1/4" to 1/2" Brazing Copper Tubing Guide: 3" Replacement Elbow : TYPE17E-5 Replacement Mixer & Nut: UM17-5
WEIGHT: 8 ounces
***NOTE: When acetylene weld/braze tips are used with fuel gases, use one size larger tip and maximum pressures to obtain proper heat. The **chart indicates approximate torch oxygen consumption with a neutral flame ratio for various gases: Pressures are approximate for hose length up to 25 ft.; increase for longer lengths about 3 psig per 25 ft. - increase working pressure 2-3 psig for check valves and flashback arrestors. Acetylene delivery pressure should not exceed 15 psig under flow conditions.
**CHART: 1.1 Oxygen to 1 Acetylene 3.5 Oxygen to 1 MAP//PRO (Propylene) 4 Oxygen to 1 Propane / Natural Gas
The popular Type17 tips come complete with elbow, mixer and nut. Use with Acetylene, Propane, MAP//Pro™ [Propylene] and Natural Gas.
Proudly Made in the USA and 100% Flame Tested Acetylene Consumption SCFH: 15-35 Fuel Pressure PSIG: 8 Oxygen Pressure PSIG: 12 Welding Metal Thickness 1/4" to 1/2" Brazing Copper Tubing Guide: 3" Replacement Elbow : TYPE17E-5 Replacement Mixer & Nut: UM17-5
WEIGHT: 8 ounces
***NOTE: When acetylene weld/braze tips are used with fuel gases, use one size larger tip and maximum pressures to obtain proper heat. The **chart indicates approximate torch oxygen consumption with a neutral flame ratio for various gases: Pressures are approximate for hose length up to 25 ft.; increase for longer lengths about 3 psig per 25 ft. - increase working pressure 2-3 psig for check valves and flashback arrestors. Acetylene delivery pressure should not exceed 15 psig under flow conditions.
**CHART: 1.1 Oxygen to 1 Acetylene 3.5 Oxygen to 1 MAP//PRO (Propylene) 4 Oxygen to 1 Propane / Natural Gas
