UNIWELD KLC100C CENTURION WELD, BRAZE, CUT w/500S STAND UPC 82701
Available*
Item # 37838268
Model # 82701
$605.15
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Torches
Tools
Torches- Heat Shrink
HVAC and Plumbing
Uniweld Products Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
UNIWELD KLC100C CENTURION WELD, BRAZE, CUT w/500S STAND UPC 82701 NEW
Uniweld KLC100C Centurion Brazing, Welding and Cutting Outfit is a professional contractor grade outfit for welding up to 1/8 inch steel, brazing up to 1 inch copper tubing and cutting up to 1/2 inch steel with supplied tips. Capabilities can be expanded with other tips and accessories purchased separately. The outfit is designed to fit on a 10 cu. ft. (MC) acetylene tank and 20 cu. ft. (R) oxygen tank. (Tanks Not Included – Sold Separately)
Single stage Centurion® series regulators with protective rubber gauge boots Front valve welding handle with stainless steel ball point valves for accurate gas control Cutting attachment with three tube tip mix for top performance and safety. Cuts up to 1/2" steel with supplied tip Optional cutting tips available for cutting up to 2" steel Welding tip for brazing up to 1" copper tubing and welding (with Acetylene) up to 1/8" steel Optional welding/brazing tips expand capabilities.
KLC100C Outfit Includes: Part No. Type17-0 Welding/Brazing Tip for brazing up to 1/2 inch copper tubing and welding up to 5/64 inch steel, Part No. Type17-2 Welding/Brazing Tip for brazing up to 1 inch copper tubing and welding up to 1/8 inch steel, Part No. 71 Welding Handle with front valves for finger tip control, Part No. CA100 Cutting Attachment is designed so the oxygen and fuel gas is mixed in the cutting tip for top performance and operator safety, Part No. CT100-0D Cutting tip for cutting up to 1/2 inch steel, Part No. RO100 Oxygen Regulator with protective rubber gauge boots and rear CGA540 inlet connection, Part No. RMC100 Acetylene Regulator with protective rubber gauge boots and CGA200 rear inlet connection, Part No. H32A 12.5 Ft. Twin Hose, Part No. WG53 Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear, Part No. FL34 Flint Lighter, Part No. WO5 Tank Key with Security Chain Part No. 500S Metal Carrying Stand with storage compartment and brazing rod holder designed to carry a 10 cu. ft. (MC) acetylene tank and 20 cu. ft. (R) oxygen tank. (Tanks sold separately.)
WEIGHT : 13.3 pounds
DIMENSIONS: 10.8 x 8.4 x 21.2 inches
Uniweld KLC100C Centurion Brazing, Welding and Cutting Outfit is a professional contractor grade outfit for welding up to 1/8 inch steel, brazing up to 1 inch copper tubing and cutting up to 1/2 inch steel with supplied tips. Capabilities can be expanded with other tips and accessories purchased separately. The outfit is designed to fit on a 10 cu. ft. (MC) acetylene tank and 20 cu. ft. (R) oxygen tank. (Tanks Not Included – Sold Separately)
Single stage Centurion® series regulators with protective rubber gauge boots Front valve welding handle with stainless steel ball point valves for accurate gas control Cutting attachment with three tube tip mix for top performance and safety. Cuts up to 1/2" steel with supplied tip Optional cutting tips available for cutting up to 2" steel Welding tip for brazing up to 1" copper tubing and welding (with Acetylene) up to 1/8" steel Optional welding/brazing tips expand capabilities.
KLC100C Outfit Includes: Part No. Type17-0 Welding/Brazing Tip for brazing up to 1/2 inch copper tubing and welding up to 5/64 inch steel, Part No. Type17-2 Welding/Brazing Tip for brazing up to 1 inch copper tubing and welding up to 1/8 inch steel, Part No. 71 Welding Handle with front valves for finger tip control, Part No. CA100 Cutting Attachment is designed so the oxygen and fuel gas is mixed in the cutting tip for top performance and operator safety, Part No. CT100-0D Cutting tip for cutting up to 1/2 inch steel, Part No. RO100 Oxygen Regulator with protective rubber gauge boots and rear CGA540 inlet connection, Part No. RMC100 Acetylene Regulator with protective rubber gauge boots and CGA200 rear inlet connection, Part No. H32A 12.5 Ft. Twin Hose, Part No. WG53 Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear, Part No. FL34 Flint Lighter, Part No. WO5 Tank Key with Security Chain Part No. 500S Metal Carrying Stand with storage compartment and brazing rod holder designed to carry a 10 cu. ft. (MC) acetylene tank and 20 cu. ft. (R) oxygen tank. (Tanks sold separately.)
WEIGHT : 13.3 pounds
DIMENSIONS: 10.8 x 8.4 x 21.2 inches
