GMP 70329 CAPSTAN DRIVE
Available*
Item # 31005500
Model # 70329
$5,332.50
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Capstans
Tools
Line Construction- Placing
Capstans
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 70329 CAPSTAN DRIVE NEW Capstan Drive
Gives your mobile hydraulic equipment the capacity to
run our line of power reels and capstans. So, even when
your vehicle doesn’t have a winch, you can still afford
the benefits of GENERAL MACHINE PRODUCTS ’s highly productive cable placing
tools, like our 32 in. Torque Limiting Capstan or our
universal C.R. Reel, using this economical device.
Our Capstan Drive features a Bell standard 2-7/16 in. (62
mm) bayonet shaft and a highly efficient planetary gear
reduction that rotates on roller bearings and is powered
by a compact, continuous duty single stage motor.
At maximum flow of 15 gpm (57 l/m) and operating
pressure of 2250 psi (15 500 kPa), the capstan shaft can
achieve 58 rpm and develops 13,000 in. lbs. (1469 N-m)
of torque. That translates into the following line speeds
and line pulls:
TRUCK BODY EQUIPMENTS & CABLE WINCHES
Capstan Drives
171
Line Speed Line Pull
Device Ft./min. (m/min.) Lbs. (kN)
7 in. Capstan 106 (32.4) 3,250 (14.45)
C.R. Reel 304 (92.6) 1,300 (5.78)
25 in. Capstan 380 (115.7) 900* (4.00*)
32 in. Capstan 486 (148.1) 700* (3.11*)
* Line pull limited to 600 lbs. (2.76 kN) typical clutch setting
A multi-disc wet brake that’s spring applied and
hydraulically released is rated for the unit’s full pulling
load. Plus, we have designed a built-in bidirectional
counterbalance valve to give you “feathering” control
over the load movement in either direction.
Physical Characteristics 8-1/2 in. square mounting face with four mounting holes for 5/8 in. bolts on 7/16 in. centers Foot mount with four tapped holes for 3/4 -10 UNC bolts Bell standard 2-7/16 in. (62 mm) bayonet shaft SAE No. 8 ports Compact 16 x 8-1/2 x 8-1/2 in. envelope (+ 7.73 in. shaft length) Control Valve Type: 3-position, 4-way motor spool (extra cost or customer supplied item) P/N 70329 Weight: 125 lbs. (56,7 kgs)
Physical Characteristics 8-1/2 in. square mounting face with four mounting holes for 5/8 in. bolts on 7/16 in. centers Foot mount with four tapped holes for 3/4 -10 UNC bolts Bell standard 2-7/16 in. (62 mm) bayonet shaft SAE No. 8 ports Compact 16 x 8-1/2 x 8-1/2 in. envelope (+ 7.73 in. shaft length) Control Valve Type: 3-position, 4-way motor spool (extra cost or customer supplied item) P/N 70329 Weight: 125 lbs. (56,7 kgs)
