DCD 35100-040 Hose Assembly 20 Ft. For Tube-lube Applicator
Available*
Item # 30513985
Model # 35100-040
$101.78
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Lubricant
Material and Supplies
Lubricants-Sealants
Lubricant- Greases
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD DESIGN/CABLE SPINNING EQUIPMENT 35100-040 Hose Assembly 20 Ft. For Tube-lube Applicator NEW
The liquid consistency of TUBE-LUBE® 326 (SG = 1.04) minimizes viscous friction which allows for easy application through the use of a spray applicator. We offer a few different spray applicators, such as: -A manually pressurized Manual Applicator Kit A manually pressurized spray tank with a pressure gauge allows the user to monitor the amount of lube being sprayed onto the cable via the included hand-held wand, or any of DCD DESIGN/CABLE SPINNING EQUIPMENT’s products fitted with a quick connect spray nozzle. Different pressures allow different volumes. A manual shut-off valve leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away. -A battery operated, back pack Power-Spray™ Applicator Kit This unit holds a little over 4 gallons and can be carried on the operator’s back. A 4 speed pump controls the volume of lube applied. The pump is operated by a re-chargeable battery with about 8 hours usage time. The unit comes complete with re-charger and a spare battery. The outlet hose also leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away. Semi-clear tank allows visibility of the lube level.
The liquid consistency of TUBE-LUBE® 326 (SG = 1.04) minimizes viscous friction which allows for easy application through the use of a spray applicator. We offer a few different spray applicators, such as: -A manually pressurized Manual Applicator Kit A manually pressurized spray tank with a pressure gauge allows the user to monitor the amount of lube being sprayed onto the cable via the included hand-held wand, or any of DCD DESIGN/CABLE SPINNING EQUIPMENT’s products fitted with a quick connect spray nozzle. Different pressures allow different volumes. A manual shut-off valve leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away. -A battery operated, back pack Power-Spray™ Applicator Kit This unit holds a little over 4 gallons and can be carried on the operator’s back. A 4 speed pump controls the volume of lube applied. The pump is operated by a re-chargeable battery with about 8 hours usage time. The unit comes complete with re-charger and a spare battery. The outlet hose also leads to a quick disconnect coupling. A 20’ long clear hose is included with the applicator with quick disconnect couplings at each end. This allows the applicator and operator to remain outside the manhole, while the connection to the duct is up to 20’ away. Semi-clear tank allows visibility of the lube level.
