DCD 24200-030 Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables
Available*
Item # 30511505
Model # 24200-030
$145.27
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Pull Eyes
Tools
Line Construction- Placing
Eyes- Cable Pulling
DCD Design And Manufacturing Ltd
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD 24200-030 Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables NEW
DCD 24200-030 Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables NEW
Part # 24200-030 Description Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables
Minimum Outside Cable Diameter 1.41 inch Maximum Outside Cable Diameter 1.59 inch Weight 0.73 lb Qty. 1
This product is designed to be threaded onto the lead end of a group of either triplex or quadplex cables so that they can be pushed through short lengths of ducting. The basic pushing eye comes with only the body and a shoulder bolt. There are several different attachments which can be threaded onto the bolt and these must be purchased separately. These include some of the accessories used with our duct rodders such as the pulling eye, the clevis end and the roller guide as well as a standard eye nut. Any of these can act as a leader for the pushing eye. Each size of pushing eye can be used to attach to different groups of cable. Because the cables can be in different quantities and diameters, the range for each pushing eye is determined by the diameter around the group of cables. This information is available on the data supplied by the cable manufacturer or it can be measured using the diagram below as a guide.
DCD 24200-030 Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables NEW
Part # 24200-030 Description Multiplex Pushing Eye 2 - 4/0 & 1- 1/0 Cables
Minimum Outside Cable Diameter 1.41 inch Maximum Outside Cable Diameter 1.59 inch Weight 0.73 lb Qty. 1
This product is designed to be threaded onto the lead end of a group of either triplex or quadplex cables so that they can be pushed through short lengths of ducting. The basic pushing eye comes with only the body and a shoulder bolt. There are several different attachments which can be threaded onto the bolt and these must be purchased separately. These include some of the accessories used with our duct rodders such as the pulling eye, the clevis end and the roller guide as well as a standard eye nut. Any of these can act as a leader for the pushing eye. Each size of pushing eye can be used to attach to different groups of cable. Because the cables can be in different quantities and diameters, the range for each pushing eye is determined by the diameter around the group of cables. This information is available on the data supplied by the cable manufacturer or it can be measured using the diagram below as a guide.
