Gmp 70046 Strand Tensionmeter With Bell Calibrations New
Available*
Item # 29879900
Model # 70046
$4,288.95
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
DYNAMOMETE
Tools
Hand Tools
Tape Measure-Levels -Tension Meters
GMP GENERAL MACHINE PRODUCTS
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
General Machine Products 70046 Strand Tensionmeter With Bell Calibrations New 70046
Commonly Referred To As A Strand Dynamometer, The Strand Tensionmeter Is Used In Tensioning New Strand And In Measuring The Tension In Existing Strand. Assures That Utilities Maintain Proper Cable Clearances To Comply With All Requirements Specified In The National Electric Safety Code'S Uniform System Of Clearances.
Click On Image Above For A Larger View Of The Strand Tensionmeter
Is A Precision Instrument Which Can Quickly Measure Tensions Of 1/4 In. (6.6 M) Extra High Strength, 5/16 In. (6 M), 3/8 In. (10 M) And 7/16 In. (16 M) Utilities Grade, Zinc Coated Guy Wires And Messenger Cables Per Astm A-475
No Battery To Run Down And Let You Down-100% Mechanical.
One Piece Construction Measures All Sizes. No Saddles To Loose.
Used On Strands Having Less Than 10,000 Lbs. Of Tension
The Tension Meter Measures Tension In Pounds Force With An Average Accuracy Of Plus Or Minus 3%. The Maximum Error Magnitude Can Be The Greater Of 7% Or 150 Pounds Force With A 3% Frequency.
This Plated Steel Instrument Measures The Force Required To Deflect The Strand To An Out Of Line Position, Registering This Force On An Integral Dial
Is Furnished With An Analog Thermometer, Temperature Compensation Charts, Detailed Instructions And A Hard Shell Plastic Carrying Case Cushioned With Foam Rubber For Protection
A Registered Serial Number Is Stamped On Each Handle
Strand Tension Readings May Be Taken At Any Convenient Point In The Span. The Actual Strand Tension Is Easily Determined By Referring To The Furnished Calibration Chart. The User Converts The Dial Indicator Reading Into The Tension Value.
The Data On The Chart Indicates The Dial Reading Of The Tensionmeter Corresponding To The Amount Of Strand Tension, In 100 Pound Increments, For The Normal Tension Range Of Each Strand Size. To Ensure Accurate Measurements Of Different Ambient Temperature Conditions, Take A Temperature Reading With Your Thermometer And Refer To The Temperature Compensation Charts.
Note: Contact General Machine Products For Any Maintenance Service And Repairs Of General Machine Products Or Any Older At&T Model B Strand Dynamometers.
Ordering Information:
P/N Description Strand Calibrations Weight
--------------------------------------------------------------------------------
70046 Strand Tension- Meter W/Bell Calibrations 1/4 In. Ehs Grade
5/16 In. Utilities Grade
3/8 In. Utilities Grade
7/16 In. Utilities Grade 11 Lbs. (5 Kgs)
--------------------------------------------------------------------------------
70446 Strand Tensionmeter W/Bell & Gte Calibrations 1/4 In. Ehs Grade
5/16 In. Ehs Grade
3/8 In. Ehs Grade
7/16 In. Ehs Grade
5/16 In. Utilities Grade
3/8 In. Utilities Grade
7/16 In. Utilities Grade 11 Lbs.(5 Kgs)
Is A Precision Instrument Which Can Quickly Measure Tensions Of 1/4 In. (6.6 M) Extra High Strength, 5/16 In. (6 M), 3/8 In. (10 M) And 7/16 In. (16 M) Utilities Grade, Zinc Coated Guy Wires And Messenger Cables Per Astm A-475
No Battery To Run Down And Let You Down-100% Mechanical.
One Piece Construction Measures All Sizes. No Saddles To Loose.
Used On Strands Having Less Than 10,000 Lbs. Of Tension
The Tension Meter Measures Tension In Pounds Force With An Average Accuracy Of Plus Or Minus 3%. The Maximum Error Magnitude Can Be The Greater Of 7% Or 150 Pounds Force With A 3% Frequency.
This Plated Steel Instrument Measures The Force Required To Deflect The Strand To An Out Of Line Position, Registering This Force On An Integral Dial
Is Furnished With An Analog Thermometer, Temperature Compensation Charts, Detailed Instructions And A Hard Shell Plastic Carrying Case Cushioned With Foam Rubber For Protection
A Registered Serial Number Is Stamped On Each Handle
Strand Tension Readings May Be Taken At Any Convenient Point In The Span. The Actual Strand Tension Is Easily Determined By Referring To The Furnished Calibration Chart. The User Converts The Dial Indicator Reading Into The Tension Value.
The Data On The Chart Indicates The Dial Reading Of The Tensionmeter Corresponding To The Amount Of Strand Tension, In 100 Pound Increments, For The Normal Tension Range Of Each Strand Size. To Ensure Accurate Measurements Of Different Ambient Temperature Conditions, Take A Temperature Reading With Your Thermometer And Refer To The Temperature Compensation Charts.
Note: Contact General Machine Products For Any Maintenance Service And Repairs Of General Machine Products Or Any Older At&T Model B Strand Dynamometers.
Ordering Information:
P/N Description Strand Calibrations Weight
--------------------------------------------------------------------------------
70046 Strand Tension- Meter W/Bell Calibrations 1/4 In. Ehs Grade
5/16 In. Utilities Grade
3/8 In. Utilities Grade
7/16 In. Utilities Grade 11 Lbs. (5 Kgs)
--------------------------------------------------------------------------------
70446 Strand Tensionmeter W/Bell & Gte Calibrations 1/4 In. Ehs Grade
5/16 In. Ehs Grade
3/8 In. Ehs Grade
7/16 In. Ehs Grade
5/16 In. Utilities Grade
3/8 In. Utilities Grade
7/16 In. Utilities Grade 11 Lbs.(5 Kgs)
