GMP 08553 SEAL PIPE B
Available*
Item # 25693750
Model # 08553
$25.25
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Air Test
Material and Supplies
Air Pressure
Parts- Miscellaneous
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 08553 SEAL PIPE B NEW The air feeder pipe seal provides an aire and moisture-tight seal in the ends of air feeder pipe rior to placing the pipe. The pipe seal is compatable with aluminum lined , polyethylene tube commonly call CA 3131 air feeder tube (.710" O.D. and .600 I. D.).
Consists of a body which includes an automotive-type tire valve, rubber bushing, knurled shell, washer, nut and valve cap.
To use, first expand the bore of the CA-3131 pipe with a C pipe shaper.
The seal is place into the prepared end of the pipe and then the nut is tightened with a 9/16" wrench to expand the rubber bushing for the seal.
Pressurize the pipe to approximately 15 psi, and check the pipe for leaks with E Pressure testing solution.
B Pipe Seal P/N 08553 Weight: 3 oz. (85g)
Consists of a body which includes an automotive-type tire valve, rubber bushing, knurled shell, washer, nut and valve cap.
To use, first expand the bore of the CA-3131 pipe with a C pipe shaper.
The seal is place into the prepared end of the pipe and then the nut is tightened with a 9/16" wrench to expand the rubber bushing for the seal.
Pressurize the pipe to approximately 15 psi, and check the pipe for leaks with E Pressure testing solution.
B Pipe Seal P/N 08553 Weight: 3 oz. (85g)
