GMP 07133 BOND B CABLE
Available*
Item # 20529505
Model # 07133
$126.14
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Bonds
Material and Supplies
Leads- Cords- Clips
Cords- Test Set- Specialty
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 07133 BOND B CABLE When splicing cable, a temporary bond must be placed across the splice to provide an uninterrupted path for sheath currents at all times. These temporary bonds allow you to achieve proper continuity until a permanent bond is established
Each type consists of a 6 ft. (1.8 m) length of 12 AWG stranded copper conductor insulated cable
The B Bond is equipped at both ends with a copper lug terminal brazed to a spring-loaded brass clamp and a 16 in. (406 mm) bronze sash chain for securing the temporary bond across the cable on either side of a cable splice
The D Bond is equipped at both ends with a C Cable Clip P/N 68693 with an insulation piercing cluster of sharpened pins
P/N 07133 B Cable Bond Weight: 7oz. (200 g) P/N 70053 D Cable Bond Weight: 6 oz. (177 g)
GMP 07133 BOND B CABLE When splicing cable, a temporary bond must be placed across the splice to provide an uninterrupted path for sheath currents at all times. These temporary bonds allow you to achieve proper continuity until a permanent bond is established
Each type consists of a 6 ft. (1.8 m) length of 12 AWG stranded copper conductor insulated cable
The B Bond is equipped at both ends with a copper lug terminal brazed to a spring-loaded brass clamp and a 16 in. (406 mm) bronze sash chain for securing the temporary bond across the cable on either side of a cable splice
The D Bond is equipped at both ends with a C Cable Clip P/N 68693 with an insulation piercing cluster of sharpened pins
P/N 07133 B Cable Bond Weight: 7oz. (200 g) P/N 70053 D Cable Bond Weight: 6 oz. (177 g)
Each type consists of a 6 ft. (1.8 m) length of 12 AWG stranded copper conductor insulated cable
The B Bond is equipped at both ends with a copper lug terminal brazed to a spring-loaded brass clamp and a 16 in. (406 mm) bronze sash chain for securing the temporary bond across the cable on either side of a cable splice
The D Bond is equipped at both ends with a C Cable Clip P/N 68693 with an insulation piercing cluster of sharpened pins
P/N 07133 B Cable Bond Weight: 7oz. (200 g) P/N 70053 D Cable Bond Weight: 6 oz. (177 g)
GMP 07133 BOND B CABLE When splicing cable, a temporary bond must be placed across the splice to provide an uninterrupted path for sheath currents at all times. These temporary bonds allow you to achieve proper continuity until a permanent bond is established
Each type consists of a 6 ft. (1.8 m) length of 12 AWG stranded copper conductor insulated cable
The B Bond is equipped at both ends with a copper lug terminal brazed to a spring-loaded brass clamp and a 16 in. (406 mm) bronze sash chain for securing the temporary bond across the cable on either side of a cable splice
The D Bond is equipped at both ends with a C Cable Clip P/N 68693 with an insulation piercing cluster of sharpened pins
P/N 07133 B Cable Bond Weight: 7oz. (200 g) P/N 70053 D Cable Bond Weight: 6 oz. (177 g)
