GMP 72301 STRAP STRAND TIE B 14 inch
Available*
Item # 55726050
Model # 72301
$12.51
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Clamp
Material and Supplies
Hardware- Screws- Bolts
Clamps
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 72301 STRAP STRAND TIE B 14" NEW Install these straps and prevent aerial cable from dancing in the wind; possibly causing cable damage
These are used to connect two parallel suspension strands that span opposite sides of the utility pole
Installation is simple and straight forward. From your starting pole, place a single B Strand Tie Strap 1/3 of the way along the span. Where severe wind conditions are a problem, place a second B Strand Tie Strap about 3/4 of the way across the span.
Each 3/16 in thick X 1 5/16 in strap is made from round edge steel, hot dipped with a galvanized finish to resist corrosion.
Three lengths of strap are available to match the mid span sag on your line. Our short version is 14 in. (356 mm) long and both ends are straight. The other two lengths, 20 in. (508 mm) and 26 in. (660 mm), have a straight end and the other end is bent into a 45° angle.
P/N Description Weight
--------------------------------------------------------------------------------
72301 14 in. B Strand Tie Strap 1 lb. 4 oz. (.57 kg) 72302 20 in. B Strand Tie Strap 2 lb. (.91 kg) 72303 26 in. B Strand Tie Strap 2 lb. 4 oz. (1.02 kg)
These are used to connect two parallel suspension strands that span opposite sides of the utility pole
Installation is simple and straight forward. From your starting pole, place a single B Strand Tie Strap 1/3 of the way along the span. Where severe wind conditions are a problem, place a second B Strand Tie Strap about 3/4 of the way across the span.
Each 3/16 in thick X 1 5/16 in strap is made from round edge steel, hot dipped with a galvanized finish to resist corrosion.
Three lengths of strap are available to match the mid span sag on your line. Our short version is 14 in. (356 mm) long and both ends are straight. The other two lengths, 20 in. (508 mm) and 26 in. (660 mm), have a straight end and the other end is bent into a 45° angle.
P/N Description Weight
--------------------------------------------------------------------------------
72301 14 in. B Strand Tie Strap 1 lb. 4 oz. (.57 kg) 72302 20 in. B Strand Tie Strap 2 lb. (.91 kg) 72303 26 in. B Strand Tie Strap 2 lb. 4 oz. (1.02 kg)
