HUBBELL 7903 3-BOLT SUSPENSION CLAMP PER/25 FOR 5/8 INCH BOLT FOR 1/4 thru 7/16
Available*
Item # 55724000
Model # 7903
$163.01
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Clamp
Material and Supplies
Hardware- Screws- Bolts
Clamps
Hubbell Power Systems
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
HUBBELL POWER SYSTEMS 7903 3-BOLT SUSPENSION CLAMP PER/25 NEW CLAMPS, SUSPENSION
Clamps are used with through bolts to support cable at poles. Through bolt also serves as clamping member. One or more nuts and/or washers are used between the pole and clamp for required spacing. No. 7901 is used on very light cables. This one bolt clamp consists of the two clamping members only. Nos. 7902-L and 7902-R are used at corners and angles.
Nos. 7903 and 7904 are used on straight runs.
Dimensions
part numbers 7901 7902L 7902R 7903 *7903L Accommodates Strand Size 1/4 thru 7/16 part number 7904 accommodates Strand Sizea 5/16 thru 3/8.
7901 75 Ship Wt. Lbs. Per 100 Pcs 7902L 232 Ship Wt. Lbs. Per 100 Pcs 7902R 232 Ship Wt. Lbs. Per 100 Pcs 7903 178 Ship Wt. Lbs. Per 100 Pcs 7903L 177 Ship Wt. Lbs. Per 100 Pcs 7904 212 Ship Wt. Lbs. Per 100 Pcs
for 5/8" BOLT
Nos. 7903 and 7904 are used on straight runs.
Dimensions
part numbers 7901 7902L 7902R 7903 *7903L Accommodates Strand Size 1/4 thru 7/16 part number 7904 accommodates Strand Sizea 5/16 thru 3/8.
7901 75 Ship Wt. Lbs. Per 100 Pcs 7902L 232 Ship Wt. Lbs. Per 100 Pcs 7902R 232 Ship Wt. Lbs. Per 100 Pcs 7903 178 Ship Wt. Lbs. Per 100 Pcs 7903L 177 Ship Wt. Lbs. Per 100 Pcs 7904 212 Ship Wt. Lbs. Per 100 Pcs
for 5/8" BOLT
