GMP 66664 PLUG SPLIT RD 4 X 3 1/16
Available*
Item # 52099100
Model # 66664
$43.20
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Duct Plug
Material and Supplies
Duct- Conduit
Closure Plugs
GMP General Machine Products
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GENERAL MACHINE PRODUCTS 66664 PLUG SPLIT RD 4 X 3 1/16 NEW Solid Conduit plugs are used to seal auxiliary holes in ducts. Expansive rubber is sandwiched between two steel disks joined by a carriage bolt. As the bolt is tightened the rubber expands creating a seal around the diameter. A tab is provided to secure a pulling rope for future use.
Split rubber plugs are used to seal the ends of ducts occupied by cables. The rubber has a diagonal slit to allow its placement over cable. Sealing occurs as the rubber is compressed by tightening of carriage bolts which extend through steel segmented plates on either side of the rubber gasket.
Plugs are designed for the nominal duct and cable size and for either square or round duct.
Part # Type Nominal Size
66631 Plug Solid Rd 1.25 66632 Plug Solid Rd 3 66633 Plug Solid Rd 3.5 66635 Plug Solid Rd 4 66637 Plug Solid Rd 4.5 66639 Plug Solid Sq 3.25 66641 Plug Solid Sq 3.625 66643 Plug Solid Sq 4 66648 Plug Split Rd 3.5 x 1.062 66649 Plug Split Rd 3.5 x 1.75 66650 Plug Split Rd 3.5 x 2.062 66651 Plug Split Rd 3.5 x 2.5 66653 Plug Split Rd 3.5 x 2.75 66657 Plug Split Rd 4 x 1.062 66658 Plug Split Rd 4 x 1.25 66659 Plug Split Rd 4 x 1.5 66660 Plug Split Rd 4 x 1.75 66661 Plug Split Rd 4 x 2.062 66662 Plug Split Rd 4 x 2.625 66663 Plug Split Rd 4 x 2.81 66664 Plug Split Rd 4 x 3.062 66666 Plug Split Rd 4.5 x 1.625
Split rubber plugs are used to seal the ends of ducts occupied by cables. The rubber has a diagonal slit to allow its placement over cable. Sealing occurs as the rubber is compressed by tightening of carriage bolts which extend through steel segmented plates on either side of the rubber gasket.
Plugs are designed for the nominal duct and cable size and for either square or round duct.
Part # Type Nominal Size
66631 Plug Solid Rd 1.25 66632 Plug Solid Rd 3 66633 Plug Solid Rd 3.5 66635 Plug Solid Rd 4 66637 Plug Solid Rd 4.5 66639 Plug Solid Sq 3.25 66641 Plug Solid Sq 3.625 66643 Plug Solid Sq 4 66648 Plug Split Rd 3.5 x 1.062 66649 Plug Split Rd 3.5 x 1.75 66650 Plug Split Rd 3.5 x 2.062 66651 Plug Split Rd 3.5 x 2.5 66653 Plug Split Rd 3.5 x 2.75 66657 Plug Split Rd 4 x 1.062 66658 Plug Split Rd 4 x 1.25 66659 Plug Split Rd 4 x 1.5 66660 Plug Split Rd 4 x 1.75 66661 Plug Split Rd 4 x 2.062 66662 Plug Split Rd 4 x 2.625 66663 Plug Split Rd 4 x 2.81 66664 Plug Split Rd 4 x 3.062 66666 Plug Split Rd 4.5 x 1.625
