DCD 42700-000E Fiber Cable Puller, Electric
Available*
Item # 30509306
Model # 42700-000E
$10,375.41
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Tuggers
Tools
Line Construction- Placing
Puller- Tuggers- Winches
DCD Design And Manufacturing Ltd
Pullers-Tuggers-Winches
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
DCD 42700-000E Fiber Cable Puller, Electric
DCD 42700-000E Fiber Cable Puller, Electric
Part # 42700-000E Description Fiber Cable Puller (Electric) w/ H-Frame Base Weight 215 lb Engine AC Electric Baldor TEFC 60 Hz Power Requirement 110V 10 AMP Work Cycle 75% Work Cycle ( 15 minutes per hour recommended cool down period.) Clutch N/A (Direct Drive) Maximum Pulling Force 2-1/4 inch Capstan 1,800 lb Maximum Pulling Force 7-1/4 inch Capstan 2,200 lb Maximum Pulling Force 30 inch Capstan 675 lb Maximum Pulling Force 42 inch Capstan 500 lb
Maximum Pulling Speed 2-1/4 inch Capstan 40 ft per minute Maximum Pulling Speed 7-1/4 inch Capstan 19 ft per minute Maximum Pulling Speed 30 inch Capstan 64 ft per minute Maximum Pulling Speed 42 inch Capstan 85 ft per minute
The Fiber Cable Puller is a simple, easy to use cable puller that is designed to accommodate industry standard sheaves of 7-1/4 inch, 30 inch, or 42 inch diameter specifically intended for use with fiber optic cables requiring a minimum bend radius. The unit is powered by the TUF-Lugger™ Lite Lifting - Electric (41000-500), providing an electric option as a simpler, lighter, less costly option than a typical hydraulic puller. Best of all, the Fiber Cable Puller is assembled using the Vertical Pull Support (42200-050) and the TUF-Lugger™ Lite (41000 series), which includes the standard capstan. Simply dismount the winch and install the standard capstan and the winch can be used as a stand-alone item, which comes with a 2-1/4 inch capstan providing a 2,200 lb pulling force. Features • 30" and 42" capstan drums are compatible with Bull-Line™ Pull Tape. • Easily Disassembled with simple tools; each component weighs less than 74 lb. • Base frame legs are removable for compact storage. They also include adjustable pads for levelling on hard surfaces. • Frame clearance allows a vertical pull out of a manhole or well. • Holes in base frame allow frame to be pegged or bolted to the ground. • Controlled using cable actuated foot pedal, allowing operator both hands to handle rope. • Vertical Pull Support (42200-050, included) is compatible with 2" square tubing adapter, making unit hitch mountable.
DCD 42700-000E Fiber Cable Puller, Electric
Part # 42700-000E Description Fiber Cable Puller (Electric) w/ H-Frame Base Weight 215 lb Engine AC Electric Baldor TEFC 60 Hz Power Requirement 110V 10 AMP Work Cycle 75% Work Cycle ( 15 minutes per hour recommended cool down period.) Clutch N/A (Direct Drive) Maximum Pulling Force 2-1/4 inch Capstan 1,800 lb Maximum Pulling Force 7-1/4 inch Capstan 2,200 lb Maximum Pulling Force 30 inch Capstan 675 lb Maximum Pulling Force 42 inch Capstan 500 lb
Maximum Pulling Speed 2-1/4 inch Capstan 40 ft per minute Maximum Pulling Speed 7-1/4 inch Capstan 19 ft per minute Maximum Pulling Speed 30 inch Capstan 64 ft per minute Maximum Pulling Speed 42 inch Capstan 85 ft per minute
The Fiber Cable Puller is a simple, easy to use cable puller that is designed to accommodate industry standard sheaves of 7-1/4 inch, 30 inch, or 42 inch diameter specifically intended for use with fiber optic cables requiring a minimum bend radius. The unit is powered by the TUF-Lugger™ Lite Lifting - Electric (41000-500), providing an electric option as a simpler, lighter, less costly option than a typical hydraulic puller. Best of all, the Fiber Cable Puller is assembled using the Vertical Pull Support (42200-050) and the TUF-Lugger™ Lite (41000 series), which includes the standard capstan. Simply dismount the winch and install the standard capstan and the winch can be used as a stand-alone item, which comes with a 2-1/4 inch capstan providing a 2,200 lb pulling force. Features • 30" and 42" capstan drums are compatible with Bull-Line™ Pull Tape. • Easily Disassembled with simple tools; each component weighs less than 74 lb. • Base frame legs are removable for compact storage. They also include adjustable pads for levelling on hard surfaces. • Frame clearance allows a vertical pull out of a manhole or well. • Holes in base frame allow frame to be pegged or bolted to the ground. • Controlled using cable actuated foot pedal, allowing operator both hands to handle rope. • Vertical Pull Support (42200-050, included) is compatible with 2" square tubing adapter, making unit hitch mountable.
