GMP 72680 BLOCK D CABLE (REPAIRED)
Available*
Item # 29761002
Model # 72680 -R
$52.50
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Blocks
Tools
Line Construction- Placing
Blocks-Placing-Prelashing- Overlashing
GMP General Machine Products
Stringing Block-Line Block-Prelashing Block
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP 72680 BLOCK D CABLE (REPAIRED)
GMP 72680 BLOCK D CABLE (REPAIRED)
P/N 72680 D Cable Block (REPAIRED) Weight: 3.8 lbs. (1.7kg)
The D Cable Block is used for supporting a single cable up to 2 3/4 in. (70mm) in diameter on 1/4 – 3/8 in. (6-10mm) bare strand prior to the lashing process. The frame and sheave are made from 100% heat treated aluminum alloy The sheave contains oilite bearings for a smooth pulling operation and a long lasting life span Contains steel inserts on the underside of each strand hook for smoother pulling and less wear Lever actuated bi-directional cam locks the frame on the strand to prevent travel while pulling in cable Cam automatically releases the block when pushed by the lasher from the other direction Contains an eye hook that allows you to lift the unit and lock it into place from the ground. (See D Cable Block Lifter) These units are normally placed anywhere from 15 ft. to 25 ft. apart on the strand depending on the cable weight and pulling conditions. 300 lbs. (136kg.f) load capacity rating.
GMP 72680 BLOCK D CABLE (REPAIRED)
P/N 72680 D Cable Block (REPAIRED) Weight: 3.8 lbs. (1.7kg)
The D Cable Block is used for supporting a single cable up to 2 3/4 in. (70mm) in diameter on 1/4 – 3/8 in. (6-10mm) bare strand prior to the lashing process. The frame and sheave are made from 100% heat treated aluminum alloy The sheave contains oilite bearings for a smooth pulling operation and a long lasting life span Contains steel inserts on the underside of each strand hook for smoother pulling and less wear Lever actuated bi-directional cam locks the frame on the strand to prevent travel while pulling in cable Cam automatically releases the block when pushed by the lasher from the other direction Contains an eye hook that allows you to lift the unit and lock it into place from the ground. (See D Cable Block Lifter) These units are normally placed anywhere from 15 ft. to 25 ft. apart on the strand depending on the cable weight and pulling conditions. 300 lbs. (136kg.f) load capacity rating.
